LOAD CAPACITY Maximum capacity of a roller runway section is 50 lb. per ft.  Overall capacity is determined by shelf frame. SPECIFICATIONS TRACK LENGTHS Available in “to the inch” cut lengths from 2ft. to 12 ft. TRACK WIDTHS 6”, 9”, 12”, 15” Nominal Width 6” 9” 12” 15” Overall Width 6 1/2” 9 1/2” 12 1/2” 15 1/2” ROLLER CENTERS 1”, 2”, or 3” ROLLER FEATURES Full Width, 3/4” diameter, aluminum, with steel axles. SELECTION GUIDE ROLLER CENTERS     Cartons with firm, flat bottoms flow well when supported by four rollers. Cartons with poor bottoms or heavier weights may require closer roller spacing. TRACK WIDTH Cartons with firm, flat bottoms can be wider than track section. PITCH Recommended pitch is 1 inch per foot.  Test for product flow.

1

11

© Copyright 1999-2004 Keneco, Inc.